Energy absorption capacity for fibre reinforced sprayed concrete : effect of panel production technique, fibre content and friction in round panel tests with continuous steel support (Series 8 and 9)

GSTDTAP > 气候变化

	Energy absorption capacity for fibre reinforced sprayed concrete : effect of panel production technique, fibre content and friction in round panel tests with continuous steel support (Series 8 and 9)
	Bjøntegaard, Øyvind
	2010-09-28
出版年	2010
语种	英语
国家	挪威
出版者	Vegdirektoratet
领域	气候变化
英文摘要	The test program is part of the on-going revision of The Norwegian Associations publication no. 7 (Sprayed concrete for rock support), which among others is to be harmonized with the new European regulations for determination of energy absorption capacity of fiber reinforced sprayed concrete. After realising the very significant and varying effect of friction in panel tests with continuous support of wood it was decided to concentrate the further investigations on support of steel. The present results show that the average coefficient of variation for the energy absorption capacity (EAC) at 25 mm displacement among all 6 individual sets in Series 8 was 7.1 % and among the six sets in Series 9 it was 8.7 %. For the parallel sets in Series 8 performed with and without friction-reducing bedding material, the results show that friction between the panel and the supporting ring of steel constitutes 25.7% and 25.0% of what is taken to be energy absorbed by the panel at final displacement of 25 mm. This is in line with earlier results. The cast panels had on average 90% energy absorption capacity compared to the sprayed panels. Possible influencing parameters are different air content, fibre orientation, compaction and w/c-ratio for cast and sprayed panels. The amounts of data are yet too scarce to draw general conclusions. Series 9 was dominated by the panel fibre contents being strongly overdosed compared to the intended nominal dosages and, correspondingly, the energy absorption values became high, especially for the steel fibre mixes. The fiber measurements in fresh concrete differed strongly from the fibre measurements that was done on samples from the panels after testing.
英文关键词	Sprøytebetong Fiberarmert betong Friksjon Tester
URL	查看原文
来源平台	Center for International Climate and Environmental Research-Oslo (CICERO)
文献类型	科技报告
条目标识符	http://119.78.100.173/C666/handle/2XK7JSWQ/1495
专题	气候变化
推荐引用方式 GB/T 7714	Bjøntegaard, Øyvind. Energy absorption capacity for fibre reinforced sprayed concrete : effect of panel production technique, fibre content and friction in round panel tests with continuous steel support (Series 8 and 9):Vegdirektoratet,2010.