Global S&T Development Trend Analysis Platform of Resources and Environment
DOI | 10.1306/01171916527 |
Confocal laser scanning microscopy and automated petrographic image analysis in different rock types: Two-dimensional images capillary pressure curves estimation and three-dimensional porosity reconstruction | |
Caja, M. A.1; Perez-Jimenez, J. L.2; Leon, M. F.1; Acero-Allard, D.3 | |
2019-08-01 | |
发表期刊 | AAPG BULLETIN
![]() |
ISSN | 0149-1423 |
EISSN | 1558-9153 |
出版年 | 2019 |
卷号 | 103期号:8页码:1963-1978 |
文章类型 | Article |
语种 | 英语 |
国家 | Spain; USA |
英文摘要 | In the past, determination of rock properties using image analysis relied upon petrographic transmitted-light images, but with limited success because of a lack of resolution and restricted computer processing power. A new technique that employs confocal laser scanning microscopy (CLSM) can be considered complementary to laboratory measurements and applicable to several samples, saving time and money and requiring only a limited amount of rock sample for analysis. We have studied several types of rocks with CLSM and fluorescent dye- impregnated thin sections. The two-dimensional scans of each thin section images is an area of 12 mm(2), with a pixel size of 0.198 mu m and were used to simulate capillary pressure curves for pore bodies and pore throats. The CLSM technique also enables three-dimensional (3-D) visualization of the rock porosity. The studied rock samples were taken from diverse oil and gas field reservoirs: case A, a conventional sandstone (15.1% porosity, 29.8 md permeability); case B, a tight sandstone (3.7%, 0.02 md); case C, an oolitic carbonate (9.6%, 0.1 md); case D, a rhodolithic algal carbonate (19.8%, 43.7 md); case E, dolomitized carbonate (17%, 21.7 md); and case F, a naturally fractured carbonate (2.4%, 0.6 md). Our results confirm that the CLSM technique can be applied to rocks of contrasting porosity and permeability to obtain computed synthetic capillary pressure curves faster than with conventional measurement methods. The technique quantifies different pore-body and pore-throat sizes and distributions, with the added ability to visualize 3-D porosity and to extract from thin section analysis petrologic properties. |
领域 | 地球科学 |
收录类别 | SCI-E |
WOS记录号 | WOS:000481614200007 |
WOS关键词 | FLUID INCLUSIONS |
WOS类目 | Geosciences, Multidisciplinary |
WOS研究方向 | Geology |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://119.78.100.173/C666/handle/2XK7JSWQ/185374 |
专题 | 地球科学 |
作者单位 | 1.Repsol Technol Lab, Geol Geomech & Petrophys, Madrid, Spain; 2.Repsol Technol Lab, Reservoir Characterizat Lab, Madrid, Spain; 3.Schlumberger Technol Corp, Schlumberger Reservoir Labs, Houston, TX USA |
推荐引用方式 GB/T 7714 | Caja, M. A.,Perez-Jimenez, J. L.,Leon, M. F.,et al. Confocal laser scanning microscopy and automated petrographic image analysis in different rock types: Two-dimensional images capillary pressure curves estimation and three-dimensional porosity reconstruction[J]. AAPG BULLETIN,2019,103(8):1963-1978. |
APA | Caja, M. A.,Perez-Jimenez, J. L.,Leon, M. F.,&Acero-Allard, D..(2019).Confocal laser scanning microscopy and automated petrographic image analysis in different rock types: Two-dimensional images capillary pressure curves estimation and three-dimensional porosity reconstruction.AAPG BULLETIN,103(8),1963-1978. |
MLA | Caja, M. A.,et al."Confocal laser scanning microscopy and automated petrographic image analysis in different rock types: Two-dimensional images capillary pressure curves estimation and three-dimensional porosity reconstruction".AAPG BULLETIN 103.8(2019):1963-1978. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论